Panasonic WV-S2500 Series - Page 149

[Authentication]
Set the user authentication method.
• Digest or Basic: Uses “Digest or Basic” authentication.
• Digest: Uses “Digest” authentication.
• Basic: Uses “Basic” authentication.
• Default: Digest or Basic
Note
• When the [Authentication] setting has been changed, close the web browser, and then access the
camera again.
• For other devices such as network disk recorders, unless otherwise stated, digest authentication is not
supported. (As of August, 2016)
[User name registration]
At the time of new registration, register a new user name in [User name]. Click [ ] in “User name
registration” to view registered users. Registered users are displayed as “Registered user name [Access
level]”. (Example: admin [1])
If you click the [Change] button on the right, the selected user will be displayed in [User name], and you can
change the password. By clicking the [Delete] button on the right, you can delete the selected user.
[User name]
Enter a user name.
• Available number of characters: 1 - 32 characters
• Unavailable characters: " & : ; \
• Default: None (blank)
Note
• When the user name already in use is entered and the [Set] button is clicked, the respective user
information will be overwritten.
[Password (8 to 32 characters)] [Retype password]
Enter a password.
• Available number of characters: 8 - 32 characters
• Unavailable characters: " &
• Default: None (blank)
Note
• Distinguish between upper- and lower cases.
• For the password, use two or more types of characters from alphabetic characters, numbers, and
symbols.
[Access Level]
Select the access level of the user from the following.
• 1. Administrator: Allowed all available operations of the camera.
• 2. Camera control: Allowed to control the camera. Functions selected for “Access level” can be operated.
• 3. Live only: Allowed to display live view. Functions selected for “Access level” can be operated.
• Default: 3. Live only
[Access level]
Select the available functions based on the user access level (camera control, live view, guest user).
• Default:
– Camera control: All are checked
– Live only: All are not checked
Operating Instructions 149
2 Settings