When using the Diffserv function, contact the network administrator.
[Image DSCP(0-63)]
Enter the packet priority for video data.
• Available values: 0 - 63
• Default: 0
[Audio DSCP(0-63)]
Enter the packet priority for audio transmission/reception.
• Available values: 0 - 63
• Default: 0
[Panasonic alarm protocol notification DSCP(0-63)]
Enter the packet priority for Panasonic alarm protocol notification.
• Available values: 0 - 63
• Default: 0
Shaping of stream
[Shaping of stream]
Select On/Off to determine whether or not to control the H.265 (or H.264) image data so that it does not burst.
It is effective in situations such as when a network device loses video data from the camera, but the video
display may be delayed.
Operating Instructions 173
2 Settings
To Next Page
Loading...
