2. When the security alert window is displayed, click “Continue to this website (not recommended).”
®The “Live” page will be displayed. If an authentication window is displayed, enter the user name and
password.
Note
• This warning is displayed because the text entered in the address box does not match the text
displayed in the subject of the certificate. This type of warning is displayed because when the
certificate for the pre-installed certificate is created, the IP address or domain name assigned to
the camera has not been determined yet. However, because the certificate configured in
“2.9.3.2 Obtaining the root certificate” (®page 175) is only issued for Panasonic products, this is
not a problem.
3. Click “Certificate error” over the URL, and click “View certificates” on the bottom of the “Mismatched
Address” window.
186 Operating Instructions
2 Settings
To Next Page
Loading...
