Panduit MP300 - Getting Started - Power On and Tape Feed; Turning On Printer and Feeding Tape

10
Top
Using the printer with
Easy-Mark Plus
Troubleshooting
Part Names and
Functions
Start Here
Cleaning
Initializing the
Settings
Label Functions
Key Menu Index
Frame and Table Lists
Symbol List
Specications
Technical Support
Start Here
3. Turning the power on
1. Press .
Auto power-o
If there is no key operation within ve minutes,
the printer automatically turns o. (The characters
you have entered in the current session are
stored.) Furthermore, if there is no key operation
within an hour while connected to a computer,
the printer automatically turns o.

Feeding the tape
CAUTION
Be sure to feed the tape every time after you install a tape
cartridge.
1. Press .
2. Select a function with
/ and then
press .
Tape feed
Feeds the tape.
Feed and cut
Feeds the tape and then cuts the tape.