EasyManua.ls Logo

PARAMOUNT BED 7B01001000A3 - Page 55

PARAMOUNT BED 7B01001000A3
120 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
54
WARNING
gNoticationisnotmadeduringbedoperation(e.g.,headup,heightad-
justment) even if the patient gets out of the bed or sits up on the bed. Fur-
thermore, getting into or out of the bed during bed operation may cause
thepatienttofallo󰀨orfallover,resultingininjury.Ifyouconsiderthatthe
patient may get in or out of the bed during bed operation, set Overall lock-
out or Patient lock-out (see p. 65).
g
BeforeusingBEDEXITALARM,setthenoticationfunctionproperly(for
the setting procedure, see the instruction manual for the relay unit). If the
settingsarenotcorrect,detectionmaynotworkandnoticationmaynotbe
made,andthepatientmayfallo󰀨orfallover,resultingininjury.Evenwhen
thesettingsarecorrect,detectionmaynotworkandnoticationmaynotbe
made in the following cases.
n If it takes 4 minutes or more for the patient to get out of the bed or sit up on the bed
n If the patient gets out of the bed or sits up on the bed after a heavy object (which weighs more than
half the patient’s weight) is placed on the bed
n If the patient who is lying at the foot end of the bed sits up (SIT-UP function)
n If the patient sits up while placing his or her hand or elbow on the top of the head end of the bed (SIT-
UP function)
gWhenusingBEDEXITALARM,useitatatemperaturebetween15˚Cand
30˚Candhumiditybetween30%RHand75%RH.Thedetectionaccuracy
maydecrease,noticationmaynotbemade,andthepatientmayfallo󰀨
or fall over, resulting in injury.
gDonotplaceobjectssuchasfurnitureandxturesbetweenthebedand
oor.Detectionmaynotworkandthepatientmayfallo󰀨orfallover,re-
sulting in injury.

Table of Contents

Related product manuals