K3.1.142e Manual NitroFlow Lab - 25 -
Symbol/data Information/result
When flashing there is an alarm; touch the symbol
and the current alarm will be shown.
Status of unit (A) Can be OFF/RUN/STAND-BY/ALARM/P-RELIEF
Menu button, touch to go to settings menu
Switch ON/OFF button, generator will turn ON or
OFF
To turn the unit on, touch the switch
-button. The status will switch to P-
RELIEF. The compressors will start three minutes (180 seconds) after the
unit has been switched on. The delay time countdown time is shown next to
the text P-RELIEF (see below).
A
To Next Page
Loading...
