K3.1.142e Manual NitroFlow Lab - 32 -
Pin code No Settings can be changed without a pin code
Pin code Change Pin code can be changed to a personal 4
digits code. (In case you forget your
personal code, consult your supplier)
Show Flow Yes Flow rate will be displayed in main screen
Show Flow (D) No Flow rate will not be displayed.
Operate to adjust date and time
6.3.5 Local settings menu
Access: Touch local settings menu button in settings screen
(refer to § 6.3)
Function: Set data to local requirements
Depending on the local situation it is possible to change the setting
accordingly.
Button Selection Result
Language English, Francais, Deutsch,
Nederlands, Español
Text in the screen will appear
in the chosen language.
Pressure BAR/PSI* Pressure indications will
appear in the chosen setting
Flow LPM/CFM Flow will appear in the chosen
setting
Purity %N2/%O2 Purity will appear in nitrogen
(%N2) or oxygen (%O2)
percentage
* Select BAR, to display temperature in °C. Select PSI to display temperature in °F.
To Next Page
Loading...
