K3.1.142e Manual NitroFlow Lab - 27 -
6.3.1 Log on menu
Access: Touch log on menu button in settings screen (refer to
§6.3)
ATTENTION: When you start-up the system for a first time
you do not need to enter a PIN CODE
Function: Protect the settings in the system with a (personal) pin
code.
In the log on menu:
• Enter the default pin code (1234) after selecting PINCODE YES
under the options menu (refer to §6.3.4).
• Change the default pin code to a personal pin code of 4 digits
(refer to §6.3.4)
• Return to default factory settings by entering pin code 7833 (refer
to §4.1)
• In case you lost your pin code, please contact your supplier
Caution:
When returning to factory settings, the alarms, p-switch,
options and settings must be reset. Also the log on
pincode is back to default value 1234
To Next Page
Loading...
