Parker NitroFlow Lab - Certificates and Service Information

K3.1.142e Manual NitroFlow Lab - 7 -
1.3 Identification and service
The identification plate is located on
the back of the NitroFlow
®
Lab. The
identification plate shows the
characteristics of the NitroFlow
®
Lab.
For service and technical assistance,
please contact:
PARKER HANNIFIN (UK) LTD
Industrial Division
Suite 42, Kent House, Romney Place
Maidstone, Kent ME15 6LH, England
Tel: +44 (0)1622 772440
Fax: +44 (0)1622 772446
For North America:
PARKER HANNIFIN CORPORATION
Filtration and Separation Division
242 Neck Road
Haverhill, MA 01835, USA
phone: 800-343-4048 or 978-858-0505
fax: 978-556-7501
http://www.labgasgenerators.com
1.4 Certificates
The NitroFlow
®
Lab meets the following requirements:
Subject Applicable standard
Electromagnetic compatibility (EMC)
NEN-EN-IEC 61000-6-3:2001
NEN-EN-IEC 61000-6-1:2001
EN 61326(1997) + A1(1998) +
A2(2001) + A3(2003), class A
EN 61000-3-2(2000)
EN 61000-3-3(1995) + A1(2001)
Electrical safety NEN EN 60204-1:2001
Safety for laboratory use UL 61010A-1 (1
st
Ed)
CAN/CSA-C22.2 No. 61010-1-04
IEC 61010-1:2001
Fig. 1-1: Identification plate