Parker NitroFlow Lab - Usage, User Instructions, and Liability

K3.1.142e Manual NitroFlow Lab - 8 -
Safety of pressure equipment Sound engineering practice
Installation IEC 61010-1 Cat II
Quality assurance ISO 9001:2000
Environmental care ISO 14001:2004
1.5 Use in accordance with purpose
The NitroFlow
®
Lab is intended to produce nitrogen out of normal ambient
air. The system is based on gas separation membranes. Each different or
further use will not be in conformity with the purpose. Parker Filtration &
Separation B.V. will not accept any liability for improper use.
The NitroFlow
®
Lab is in compliance with the prevailing directives and
standards. Only use this NitroFlow
®
Lab in a technically perfect condition, in
conformity with the purpose as described above.
1.6 User instructions
Only well-trained personnel are allowed to work on the NitroFlow
®
Lab. The
user must be aware of hazards related to operating the NitroFlow
®
Lab and
processes connected to the NitroFlow
®
Lab. The user is responsible for the
safety of the personnel. All personnel working on the NitroFlow
®
Lab must
have free access to the applicable manuals.
1.7 Liability
Parker Filtration & Separation B.V. will not accept any liability if:
• The instructions in this manual are ignored.
• Replacement parts are used which are not approved by the
manufacturer.
• The NitroFlow
®
Lab is operated incorrectly.
• The system is fed with other gasses than air.
• The NitroFlow
®
Lab is modified without notification and authorization of
Parker.
• Maintenance and repair are not carried out according to the
instructions.