K3.1.142e Manual NitroFlow Lab - 31 -
6.3.4 Options menu
Access: Press option menu button in settings screen (refer to
§6.3)
Function: Set different options
ATTENTION:
All options are default set to NO. Options do not affect the
output and purity.
Button Selection Result
Auto R. Yes After a power failure the unit will
automatically restart itself and return to the
same situation/status.
Auto R. No After a power failure the unit will not start
automatically. Unit needs to be restarted
manually.
Remote Yes Unit can be switch on and off from a remote
location. Only select Yes after connecting
the printed circuit board to an external
device.
Remote No Unit cannot be controlled from a remote
location.
Pincode Yes Settings are instantly protected with a pin
code. Return to log on menu
and enter
the default pin code 1234.
To Next Page
Loading...
