K3.1.142e Manual NitroFlow Lab - 37 -
Shows all the alarms that have been
saved on the memory drive (see below)
Button Explanation
A Date and time of alarm incident
B Alarm description
C The number of logged alarms
It is also possible to read the logged data from the SD-card on a computer.
To read the files:
1. Switch off the unit.
2. Remove the SD-card
3. A new folder is saved on the SD-card every month. Each folder
contains a almxxxx.csv and a logxxx.csv file.
4. Select the files needed.
5. Open the data-files with an Excel spread sheet
6. Place the SD-card back in the unit.
7. Switch the unit back on.
CAUTION:
Please check the alarm, p-switch, options and settings
before you restart the unit.
The unit cannot run without the SD-card. This will
generate an alarm (SD-card failed).
B
C
To Next Page
Loading...
