Parker NitroFlow Lab - Page 46

K3.1.142e Manual NitroFlow Lab - 46 -
5. Open the front panel (refer to Fig. 9-3).
6. Disconnect the plug from the printed circuitboard (refer to Fig.
9-4).
7. Disconnect the tubing from the inlet filter (refer to Fig. 9-5).
8. Loosen the screws of the brackets (refer to Fig. 9-6).
9. Slide out the inlet filter and replace it with the new one. Follow
the steps in reverse order.
10. Switch the NitroFlow
®
Lab back on.
Fig. 9-4
Fig. 9-3
Fi
g
. 9-5 Fi
g
. 9-6