Parker SPD 2 - Appendix C: Default Program for the Pico-PLC

Parker Hannifin S.p.A. Divisione.S.B.C. manuale d’uso SPD
105
18 Appendix C : Default program for the pico-PLC
90.0
40.6
END
41.5
90.1
91.041.4
91.141.11
LD 90.0
OUT 41.5
LD 90.1
OUT 40.6
LD 41.4
OUT 91.0
LD 41.11
OUT 91.1
END
digital input 0 used to power
the drive
digital input 1 used for the stop
function
digital output 0 indicates that
the converter is OK
digital output 1 indicates that
the thermal motor image is
active
end of the program