MIC 1161 Manual
40
While the Hardware Definition Code is displayed, depressing the SCROLL
key will cause the display to change to:
nonE or r485 or rrES
OPtn OPtn OPtn
Where "nonE" indicates the absence of the communications option and the
remote reset option. "r485" indicates the presence of the communications
option. "rrES" indicates the presence of the remote reset option.
NOTE: It is essential that this code is changed whenever there is a change
to the instrument's hardware configuration (change of input type, alarm/
retransmit output etc.). The instrument's software depends upon this code
to ensure that the instrument operates correctly.
To exit from the Hardware Definition Code display, depress the DOWN and
SCROLL keys simultaneously.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
