Partner SP-600-A - Getting Started; Unpacking the Machine

1
CHAPTER 1
GETTING STARTED
This chapter describes the procedures from unpacking the SP-600-A, to powering it on. The following topics
are described.
• Unpacking the machine on page 1
• Identifying components on page 2
• Connector pin dene on page 5
Unpacking the machine
It is a good idea to save the packaging materials and shipping box in case that machine needs to be returned
for service. Please un-pack and re-pack the machine terminal as shown in Figure 1.1.
Figure 1.1 Unpacking the
machine