Copyright © 2014 PAYTER
BV. All rights reserved. No
part of this document may be
reproduced in any form by
print, photo print, microfilm,
electronic copy or any other
means without written
permission by Payter BV.
RTP Mode
6.4.1 Description
The Remote Terminal Protocol (RTP) is a proprietary protocol used to interface with Payter
terminals from host systems such as Cash Registers or other PC applications. To integrate the P6X
Terminal functionality in your application, a dotNET SDK is available that can be used to perform
transactions.
Fig. 11 - RTP mode of operation, over either LAN or USB
This mode of operation is very specific and dependent on how the P6X Terminal is integrated in
the host machine application. Refer the host machine documentation for operational details.
Refer to the dotNET SDK documentation on a detailed description how to integrate the terminal
in an application.
6.4.2 Applicable Settings
RTP settings are covered in the RTP documentation.
To Next Page
Loading...
