Copyright © 2014 PAYTER
BV. All rights reserved. No
part of this document may be
reproduced in any form by
print, photo print, microfilm,
electronic copy or any other
means without written
permission by Payter BV.
When checked the terminal will use a Dynamic IP address, all
remaining settings will be automatically set and cannot be
adjusted by the user.
When unchecked a Static IP address will be used, the
remaining settings become available and need to be
completed before the Terminal can be used.
Use setting provided by the network administrator
Use setting provided by the network administrator
Use setting provided by the network administrator
Use setting provided by the network administrator
Note that the terminal only supports a single DNS address
when configured with Static IP.
Table 15 - Ethernet/LAN settings
To Next Page
Loading...
