Payter P68 - Page 40

P6X Series User Manual
Page 40 / 50
Copyright © 2014 PAYTER
BV. All rights reserved. No
part of this document may be
reproduced in any form by
print, photo print, microfilm,
electronic copy or any other
means without written
permission by Payter BV.
3XX
This error range covers transaction related errors
1. Perform network trouble shooting
2. Try reloading the terminal configuration files
301
Transaction host error, this fault code indicates a specific
issue that occurred while the Host was processing a
transaction.
4XX
This error range covers errors related to the contactless
interface. Perform a test with another contactless card or
token to validate that the card is not the cause of the
problem. If
XX
1XX
5XX
6XX
7XX
Terminal internal error.
If the result code is not specifically listed, but falls in one of
these categories then the terminal has an internal error,
contact your local supplier for assistance.
Table 19 – Result code description
Display message
Description
Possible Solution
“Wait for network”
No active network connection
detected.
Perform LAN or mobile internet
trouble shooting
"Recover network"
Network connection Lost
Perform LAN or mobile internet
trouble shooting
“NO SAM”
No SAM module detected during
startup.
“Invalid Arguments”
No valid configuration is present
“Initializing”
If the terminal remains in this state it
is not receiving commands from the
vending machine.
Check the settings for
MDB/PVP/CCI.
Table 20 – Display message description