2
20
Mini-101M
2.The MFP Servers on the network will be displayed on the following
window. Select the MFP Server you would like to add to the list.
3.Select the MFP that is connected to the selected MFP Server. Click
ņOKŇ. Note that in some cases, new coming printing jobs cannot
be printed because the MFP is already disconnected. It will cause
unformatted messages to be printed out. The enabled default status isņ
Keep connecting for 30 second(s) after printing has been finished (5-60),
Ňit will help to avoid the above situation.
To Next Page
Loading...