6\VWHP&RQÀJXUDWLRQ
Double click on System icon and then the System configuration
window will pop-up. On the upper page of System settings you can see
the enabled printing protocols. At the bottom of the page, including
ņUpgradeŇandņLoad DefaultŇfunctions.
Upgrade: If you want to update firmware, please go to Planex
Communication Inc. website : http://www.planex.net to find the suitable
version of firmware, and download it to your computer. After that, click
icon to browse the files and find the latest firmware file you've
downloaded. After finding the firmware file, please clickņUpgradeŇto
start firmware upgrading. During upgrading, please DO NOT cut off the
power to avoid upgrade failure. When upgrading complete, you may click
ņOKŇto go back to the main page
Before you upgrade the firmware, please make sure that the IP
Address settings of the MFP Server are in the same network with
your computer.
To Next Page
Loading...