To Next Page

To Previous Page

6. CAMWARE 4 SOFTWARE

Exposure time > Sensor frame readout time

In case the required exposure time is longer than the frame readout

time, the image sensor is completely exposed to light for some time

(Show common time of ‘All Lines’ also see General Timing

Diagram). In case of a triggered flash illumination, this would be the

best moment to illuminate the image sensor. The hardware signal for

the time Show common time of ‘All Lines’ is available on connector

#4 (see 6.3.7).

This is an example timing diagram for Trigger Mode Auto

Sequence, SMA explanation see 6.3.7

Other manuals for Pco pco.panda 4.2

Questions and Answers:

Need help?

Do you have a question about the Pco pco.panda 4.2 and is the answer not in the manual?

General