Pendulum CNT-91R Programmer's Handbook

Query errors
Error
Number
Error Description description/explanation/examples
–400
Query error This code indicates only that a Query Error as de
-
fined in IEEE-488.2, 11.5.1.1.7 and 6.3 has oc
-
curred.
–410
Query
INTERRUPTED
Indicates that a condition causing an INTER
-
RUPTED Query error occurred (see IEEE-488.2,
6.3.2.3); for example, a query was followed by DAB
or GET before a response was completely sent.
Query INTER
-
RUPTED; in send
state
The additional information indicates the IEEE-488.2
message exchange state where the error occurred.
Query INTER
-
RUPTED; in query
state
Query INTER-
RUPTED; in re-
sponse state
–420
Query
UNTERMINATED
Indicates that a condition causing an
UNTERMINATED Query error occurred (see
IEEE-488.2, 6.3.2.2); for example, the counter was
addressed to talk and an incomplete program mes-
sage was received.
Query
UNTERMINATED;
in idle state
The additional information indicates the IEEE-488.2
message exchange state where the error occurred
Query
UNTERMINATED;
in read state
Query
UNTERMINATED;
in send state
–430
Query
DEADLOCKED
Indicates that a condition causing an DEADLOCKED
Query error occurred (see IEEE-488.2, 6.3.1.7); for
example, both input buffer and output buffer are full
and the counter cannot continue.
–440
Query
UNTERMINATED
after indefinite re
-
sponse
Indicates that a query was received in the same pro
-
gram message after an query requesting an indefi
-
nite response was executed (see IEEE-488.2,
6.5.7.5.7.)
Error Messages
7-12 Error Code -400 to -440

Pendulum CNT-91R Specifications

General

Brand	Pendulum
Model	CNT-91R
Category	Measuring Instruments
Language	English