Installer manual Fleck 2850 SXT - Installation
42 / 104 Ref. MKT-IM-030 / C - 12.05.2020
5.5.2 Side-mounted valve installation
Valid for location having a reduced height.
Inlet Inlet shutoff
Rubber expansion joint
Fleck meter
Outlet shutoff
Support tripod
Manual shutoff valve bypass
Outlet
Tank
Drain line
Rubber expansion joint
• To avoid the piping supporting the valve and side adapter weight, they must be fixed on a
tripod or any other appropriate support;
• in order to adequately compensate the tank elongation, the rubber expansion joints must be
mounted on the top and bottom of the tank. In red on the diagram above.
To Next Page
Loading...
