Pentair FLECK 2850 SXT - Micro-Switches Replacement

Installer manual Fleck 2850 SXT - Maintenance
Ref. MKT-IM-030 / C - 12.05.2020 79 / 104
9.4.5 Micro-switches replacement
Info
This procedure is valid for AC and DC motor assemblies.
1. Using a flat screwdriver, unscrew(2) and open the cover(1).
2. Open the SXT controller (3), or, using a Philips screwdriver, unscrew (4) and open the SXT
controller (5).
3. Disconnect the microswitches (6).
4. Using a Phillips screwdriver, unscrew(7).
5. Remove and change the microswitches (6).
6. Reverse above procedure steps to rebuild.