Pentair FLECK 2850 SXT - Cams Replacement

Installer manual Fleck 2850 SXT - Maintenance
Ref. MKT-IM-030 / C - 12.05.2020 81 / 104
9.4.6 Cams replacement
Info
This procedure is valid for AC and DC motor assemblies.
1. Remove the micro-switches, see Micro-switches replacement.
2. Using pliers, remove the circlip (1) and free the arm (2).
3. Using pliers, remove the pin(s) (4 and/or 5) and the cam(s) (3 and/or 6).
4. Replace the cam(s) (3 and/or 6).
5. Reverse above procedure steps to rebuild.