2
IntelliTouch ScreenLogic User’s Guide
IntelliTouch System Components
The main required components of an IntelliTouch system are the Load or Power Center, IntelliTouch Personality
Kits, and the Interfaces:
Load or Power Center
• Load Center: Provides a larger footprint (17" W x 23" H) Includes built-in sub panel (125 AMPS) capable
of holding up to eight 1 inch breakers. Also includes five 25 AMP three HP relays, 110/240 V transformer
with secondary side circuit protection. Multiple knockouts for different sizes of conduit are supplied as well
as a GFCI side knockout. The Load Center provides ample space for all high and low voltage wiring needs.
• Power Center: Offers a smaller footprint (17" W x 17" H) than the Load Center. The Power Center does
not include a circuit breaker base. Users should choose this enclosure if they already have existing circuit
breakers/sub-panel for their equipment.
• Expansion Kits: Models i5X and i10X, offer five or ten additional Auxiliary Circuits for systems i9+3,
i9+3S and i10+3D. Each IntelliTouch Expansion Kit requires a Load Center (P/N 520136) or Power Center
(P/N 520137). Up to three Expansion Kits and Load or Power Centers may be added to a system, for
control of up to 38 Auxiliary Circuits (40 auxiliary circuits for i10+3D).
IntelliTouch Personality Kits
There are several types of IntelliTouch control systems available for different pool/spa configurations:
• Shared Equipment: Pool and spa combinations with shared filtration system – Pool owners can enjoy
the convenience of motorized valves for water flow separation between pool and spa. The Personality Kit
models are:
• i5 (P/N 520505) - Four auxiliary circuits plus filter pump operation. Five relays are included in
the Load Center.
• i7+3 (P/N 520507) - Six auxiliary circuits plus filter pump operation and the +3 option (create a
Feature circuit for valve actuators without using an existing output auxiliary circuit). Two relays
are included in the kit and five in the Load Center.
• i9+3 (P/N 520509) - Eight auxiliary circuits plus filter pump operation and the +3 option (create
a Feature circuit for valve actuators without using an existing output auxiliary circuit). Four relays
are included in the kit and five in the Load Center.
• Dual Equipment: Pool and Spa with Dual Sets of Equipment – The IntelliTouch i10+3D (P/N 520510)
system provides advanced automation for a pool and spa using two separate sets of equipment. This
IntelliTouch Personality Kit controls ten pump and/or lighting circuits and two heaters. The Personality Kit
includes, eight auxiliary circuits plus filter pump operation and the +3 option (create a Feature Macro circuit
for valve actuators without using an existing output auxiliary circuit). Five relays are included in the kit and five
in the Load Center.
• Single Equipment: Pool Only or Spa Only Applications – The IntelliTouch i5S (P/N 520506) and i9+3S
provide advanced automation for a single body of water. The i5S (P/N 520506) Personality Kits includes
four auxiliary circuits plus filter pump operation. There are five relays in the IntelliTouch Load Center. The
i9+3S (P/N 520508) Personality Kits includes eight auxiliary circuits plus filter pump operation and the +3
option (create a Feature Macro circuit for valve actuators without using an existing output aux circuit). Four
relays are included in the kit and five in the Load Center.
To Next Page
Loading...
Need help?
General
