78
IntelliTouch ScreenLogic User’s Guide
Equipment: Chlorinator Screen
Use the Equipment screen to control various system functions and view the system status.
Chlorinator Status and Controls Screen
To access the Chlorinator status and controls screen:
1. From the main ScreenLogic screen, tap the Equipment and Chlorinator tab. The chlorinator screen shows:
• Chlorinator Status: Shows the current chlorinator operating condition. If an error is detected, the displayed
error message box is highlighted in yellow.
• Pool Output: Displays the pool chlorination output level from 0 to 100%. Tap the left or right arrow to
increase or decrease the pool chlorination output level. The IntelliTouch system will automatically drop the
chlorine output levels to 1/20 the output when the Spa mode is switched on. For example, if the pool output
level is set to 60%, when the Spa is switched on, the chlorination output level will be 3%.
• Spa Output: Displays the spa chlorination output level from 0 to 100%. Tap the left or right arrow to
increase or decrease the spa chlorination output level.
• Super Chlorinate: Tap the Start button to start “Super Chlorination” for 24 hours. Tap the Stop button to
stop Super Chlorination. The default run time is 24 hours.
• Salt Level: Displays how much salt (in ppm: parts per million) is in the water. The color of the status bar
indicates the condition of the water. Corresponding information is displayed under the status bar. Also see the
chlorinator manufacturer’s instructions for recommended salt levels.
To Next Page
Loading...
Need help?
General
