116
Shooting Functions
4
When an image is tilted, it can be corrected up to a maximum of ±1.0
degrees (when Shake Reduction is turned on).
1
Select [Horizon Correction] in the [A Rec. Mode 3] menu.
2
Use the four-way controller (45)
to select P (Off) or O (On).
3
Press the 3 button.
The screen that was displayed before selecting the menu item appears
again.
4
Aim the camera at the subject, and press the shutter release
button halfway.
When [Horizon Correction] is set to On by selecting the check box, the
following indicators appear on the status screen or Live View screen.
Correcting the Tilt of the Images
D Shake Reduction On + Horizon Correction On
E Shake Reduction Off + Horizon Correction On
High-ISO NR
Slow Shutter Speed NR
MENU
123 4
Shake Reduction
Input Focal Length
Exit
Composition Adjust.
Electronic Level
Horizon Correction
e_kb524_84percent.book Page 116 Friday, June 15, 2012 12:13 PM
To Next Page
Loading...
