Pentax K-30 - Initial Settings; Setting the Display Language

56
Getting Started
2
Initial Settings
The first time the camera is turned on, the [Language/u] screen appears
on the monitor. Follow the procedure below to set the language displayed
on the monitor and the current date and time.
If the [Date Adjustment] screen appears,
proceed to “Setting the Date and Time”
(p.58).
You can set the language in which the menus, error messages, etc. are
displayed.
1 Use the four-way controller (2345) to select the desired
language, and press the 4 button.
The [Initial Setting] screen appears in the
selected language.
Proceed to Step 6 if W (Hometown) does
not have to be changed.
2 Press the four-way controller (3) to move the frame to W,
and press the four-way controller (5).
The [W Hometown] screen appears.
Setting the Display Language
Cancel
Cancel
MENU
Date Adjustment
Date Adjustment
Date Format
Date Format
Date
Date
Time
Time
mm/dd/yy
mm/dd/yy
24h
24h
0 1 / 0 1 / 2 0 1 2
01/01/2012
00:00
00:00
Settings complete
Settings complete
Cancel
Cancel
MENU
Initial Setting
Initial Setting
Settings complete
Settings complete
English
English
New York
New York
Text Size
Text Size
Standard
Standard
e_kb524_84percent.book Page 56 Friday, June 15, 2012 12:13 PM