Before Using Your Camera
1
19
5 Front e-dial (R)
Changes the set value.
You can change the menu
when a menu screen is
displayed. (p.39)
6 Lens unlock button
Press to detach a lens. (p.53)
7 Mode dial
Changes the capture mode.
(p.80)
8 E (Flash pop-up) button
Press to pop up the built-in
flash. (p.69)
9 V/Y button
You can assign a function to
this button. (p.165)
0 Focus mode switch
Changes the focus mode.
(p.99)
a U/i (Live View) button
Displays the Live View image.
(p.24)
Deletes the image during
Instant Review. (p.64)
b M button
Displays the control panel.
(p.26) Press again to change
the type of information
displayed in standby mode.
(p.27)
c Rear e-dial (S)
Sets the shutter speed,
aperture and EV
compensation values. (p.88)
You can change the settings
when the control panel is
displayed. (p.38)
You can change the menu
when a menu screen is
displayed. (p.39)
d =/L button
You can select the function of
this button either to focus on
the target or to lock the
exposure value. (p.94, p.167)
e Q (Playback) button
Switches to playback mode.
(p.70)
f 4 button
When the control panel or a
menu screen is displayed,
press this button to confirm
the selected item.
When both [AF Active Area]
and [Contrast AF] are set to
[Select], press this button to
enable or disable changing
the autofocusing (AF) point or
area. (p.103, p.106)
When the camera is in \
mode or when the focus is
locked during Live View, press
this button to magnify the
image on the monitor. (p.107)
e_kb524_84percent.book Page 19 Friday, June 15, 2012 12:13 PM
To Next Page
Loading...
