Pentax K-30 - Using the Control Panel

Before Using Your Camera
1
37
In standby mode, you can switch to the control panel and change settings.
Below, how to set [JPEG Quality] is explained as an example.
1 Press the M button in standby
mode.
The control panel appears.
2 Use the four-way controller
(2345) to select an item you
want to change the setting for.
You cannot select items that cannot be
changed as a result of current camera
settings.
3 Press the 4 button.
The setup screen of the selected item
appears.
4 Use the four-way controller (45)
or rear e-dial (S) to select a
setting value.
Using the Control Panel
Custom Image
Custom Image
Bright
Bright
128
128
JPEG Quality
JPEG Quality
128
128
JPEG Quality
JPEG Quality
128
128
OK
OK
OK
Cancel
Cancel
MENU
e_kb524_84percent.book Page 37 Friday, June 15, 2012 12:13 PM