268
Appendix
10
Camera overheated.
Disabling Live View
temporarily
to protect circuitry
Live View cannot be used because the camera’s
internal temperature is too high. Try using Live
View again when the camera has cooled down.
The camera will turn off
to prevent damage from
overheating
The camera will turn off because its internal
temperature gets too hot. Leave the camera
turned off and give it enough time to cool down.
Turn it on again after a while.
Error Messages Description
e_kb524_84percent.book Page 268 Friday, June 15, 2012 12:13 PM
To Next Page
Loading...
