Pentax Optio 33WR - Setting the Light Metering Range

45
4
Taking Pictures
You can choose the part of the screen to use for measuring brightness
and determining exposure.
1 Press the MENU button in Capture mode.
The [
A
Rec. Mode] menu will be displayed.
2 Select [AE Metering] on the [
A
Rec. Mode] menu.
3 Press the four-way controller (45)
to change the metering mode.
4 Press the OK button.
The camera is ready to take the picture.
e F
Setting the Light Metering Range
L
Multi-segment
Detailed measurement of entire screen to determine
exposure.
M
Center-weighted
Measures mainly the center of the screen to determine
exposure.
N
Spot
Measures only the very center of the screen to
determine exposure.
Saving the AE Metering Method 1p.68
AWB
Multiple
2048 1536Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Rec. Mode
OK
OK
1/3 Exit
MENU
MENU button
Four-way
controller
OK button
AWB
Multiple
2048 1536Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Rec. Mode
OK
OK
1/3 Exit
MENU