Pentax Optio 33WR - Changing the Start-Up Screen

97
6
Editing/Settings
You can display an image recorded with the camera as the welcome
screen when the camera is turned on.
1 Select [Screen Setting] on the [B Set-up] menu.
2 Press the four-way controller (5).
The Screen Setting screen will be displayed.
3 Press the four-way controller (5).
The screen for changing the start-up screen will
be displayed.
4 Press the four-way controller (45)
to select O (On) or P (Off).
O Displays the start-up screen.
P Does not display the start-up screen.
5 Press the Z button.
6 Use the four-way controller (45) to select the image
you want to display as the start-up screen.
7 Press the OK button 4 times.
The camera is ready for capture or playback.
Changing the Start-up Screen
Once the start-up screen has been set, it will not be erased even if the
original image is deleted or the SD Memory Card / MultiMediaCard is
formatted. To delete the start-up screen, reset the setting. (1p.99)
Change Start-up Screen
OK
OK
Exit
MENU
Start-up Screen
Optio
Image