50
4
Taking Pictures
Taking Pictures
In Program Mode (e), you can set all the functions and take pictures.
1 Press the four-way controller (3) in Capture Mode.
The virtual mode dial is displayed.
2 Press the four-way controller (45)
to select [e].
3 Press the OK button.
The camera is ready to take the picture.
4 Set the functions you want to use.
See “Setting the Capture Functions” (p.36-p.49) for instructions.
5 Press the shutter release button.
The picture is taken.
Program Mode
Taking Still Pictures 1p.24
Four-way controller
OK button
Shutter release button
OK
OK
SNAP
To Next Page
Loading...
