Pentax Optio RS1000 - Adding a Frame (Frame Composite)

147
5
Editing and Printing Images
This function lets you add a decorative frame to still pictures. There are
20 frames already stored in the camera.
1 Enter the Q mode and use the four-way controller ( 45 )
to choose the image to which you want to add a frame.
2 Press the four-way controller (3).
The Playback Mode Palette appears.
3 Use the four-way controller
(2345) to select N (Frame
Composite).
4 Press the 4 button.
A 9-frame display of the frame selection screen appears.
5 Use the four-way controller
(2345) to choose a frame.
• The red-eye compensation function cannot be used on panoramic
images, images taken with I (16-frame shooting) mode, movies or on
images where red eyes cannot be detected on the camera. An error
message appears in Step 4.
• The red-eye compensation function can only be used with still pictures
taken with this camera.
Adding a Frame (Frame Composite)
OK
OK
MENU
Cancel
For composing an image
with a frame. Select Over-
write or Save as to save
Frame Composite
Frame Composite
1/2
1/2
y
OK
OK
OK
OK