83
3
Taking Pictures
5
Press the 4 button.
The selected icon appears and the camera
returns to capture status.
6
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
7
Press the shutter release button fully.
The picture is taken.
In N (Frame Composite) mode, you can take pictures using the frames
stored in the camera.
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
Use the four-way controller (2345) to select N and
press the 4 button.
A 9-frame display of the frame selection screen appears.
Framing Your Pictures (Frame Composite Mode)
10/10/2010
3838
14:25
Four-way controller
4 button
Zoom/f/y button
Shutter release button
To Next Page
Loading...
Need help?
General
