Pentax Optio RS1000 - Printing All Images

157
5
Editing and Printing Images
When you choose the number of copies and whether or not to insert the
date, the settings are applied to all the images stored in the camera.
1 Display the screen for DPOF settings in Q mode.
Refer to Steps 1 to 3 on p.155.
2 Use the four-way controller (23) to select [All Images].
3 Press the 4 button.
The message [Applies DPOF settings to all images] appears.
4 Choose the number of copies and
whether to insert the date or not.
Refer to Steps 6 and 7 in “Printing Single
Images” (p.156) for details on how to make
the settings.
5 Press the 4 button.
The settings for all the images are saved and the camera returns to the
DPOF setting screen.
\
Printing All Images
The number of copies specified in the [All Images] setting applies to all
the images. Before printing, check that the number is correct.
Settings for single images are canceled when settings are made with [All
Images].
Copies
Applies DPOF settings
to all images
Applies DPOF settings
to all images
Date
Date
Date
Cancel
Cancel
Cancel
OK
OK
OK
OK
MENU
01