Pentax Optio RS1000 - Resetting to Default Settings (Reset)

174
6
Settings
You can reset the camera settings to their defaults. Refer to “Default
Settings” (p.200) for the reset settings.
1 Press the 3 button in Q mode.
[W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2 Use the four-way controller (23)
to select [Reset].
3 Press the four-way controller (5).
The [Reset] screen appears.
4 Use the four-way controller (23)
to select [Reset].
5 Press the 4 button.
The settings return to the defaults.
• Once the start-up screen has been set, it will not be deleted even if the
original image is deleted or the SD Memory Card is formatted.
• Select [Off] to hide the start-up screen.
• The start-up screen is not displayed when the camera starts up in the
playback mode.
Resetting to Default Settings (Reset)
Setting
Power Saving
Auto Power Off
3min.
5sec.
Video Out
Brightness Level
2/3
MENU
Cancel
Cancel
Exit
NTSC
Delete all
Reset
Reset
Returns to default
settings
Reset
Cancel
OK
OK