172
6
Settings
You can set the camera to turn off automatically when no operation is
performed for a fixed time.
1
Press the 3 button in Q mode.
[W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
Use the four-way controller (23) to select [Auto Power
Off].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to select the time until the camera
turns off automatically.
Choose from [5min.], [3min.] or [Off].
5
Press the 4 button.
The setting is saved.
Setting the Auto Power Off Function
Auto Power Off does not function in the following situations:
- while recording a movie
- during a slideshow or movie playback
- while the camera is connected to a computer
Setting
Power Saving
Auto Power Off
Off
3min.
5min.
Video Out
Reset
Brightness Level
2/3
MENU
Cancel
Cancel
OK
OK
OK
NTSC
Delete all
5sec.
To Next Page
Loading...
Need help?
General
