85
3
Taking Pictures
In Self-timer mode, the picture is taken ten seconds or two seconds after
the shutter release button is pressed.
Stabilize the camera with a tripod when taking a picture with the self-timer.
1
Press the four-way controller (2) in A mode.
2
Use the four-way controller
(453) to select g or Z and press
the 4 button.
The camera is ready to take the picture
using the self-timer.
Optional Frames
The optional frames are stored in the built-in memory in the Optio RS1000.
These optional frames are deleted if the built-in memory is formatted or if the
built-in memory files are deleted with a computer. To reload the optional frames
into the built-in memory, copy the files from the CD-ROM (S-SW111) supplied
with the camera (p.149).
Adding a Frame to a captured image 1p.147
Using the Self-timer
g
Use this mode when you want to be included in a group picture. The picture
is taken approximately ten seconds after the shutter release button is pressed.
Z
Use this mode to avoid camera shake. The picture is taken approximately two
seconds after the shutter release button is pressed.
Four-way controller
4 button
Shutter release button
Drive Mode
Self-timer
OK
OK
MENU
Cancel
To Next Page
Loading...
Need help?
General
