84
3
Taking Pictures
3
Use the four-way controller
(2345) to choose the frame you
want to use.
4
Press y on the Zoom/f/y button.
The selected frame appears in single-image display.
You can choose another frame using either of the following operations.
Four-way controller (45) Press to choose a different frame.
Zoom/f/y button (f) Press to return to the 9-frame display of
the frame selection screen, and then
perform Step 3 to choose a different
frame.
5
Press the 4 button.
The frame appears on the display.
When the camera detects a face, the Face
Detection function is activated and the face
detection frame appears (p.67).
6
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
7
Press the shutter release button fully.
The picture is taken.
•In N mode, recorded pixels is fixed at h (2048 × 1536).
• At shipment, the camera includes 3 default frames and 17 optional
frames built-in. (The CD-ROM supplied with the camera contains a
total of 90 frames, including the default frames.)
y
OK
OK
OK
38
38
14:25
14:25
10/10/2010
To Next Page
Loading...
