62
3
Taking Pictures
Taking Still Pictures
The Optio RS1000 features a wide range of shooting modes and
functions to suit almost any subject or scene. This chapter describes
how to take pictures with the most commonly used standard settings (the
factory default settings).
1
Press the power switch.
The camera turns on and is ready to take still pictures. In this manual,
this is called Still Picture Capture Mode.
2
Confirm the subject and shooting
information on the display.
The focus frame in the middle of the display
indicates the zone of automatic focusing.
When the camera detects a face, the Face
Detection function is activated and the face
detection frame appears (p.67).
You can change the captured area by
pressing the Zoom button to the left or right
(p.73).
x (Right) enlarges the subject.
w(Left) widens the area that is
captured by the camera.
Taking Pictures
Zoom button
Shutter release buttonPower switch
14:25
14:25
38
38
10/10/2010
Focus frame
14:25
38
10/10/2010
38
14:25
Face detection frame
To Next Page
Loading...
Need help?
General
