36
1
Getting Started
6
Connect the DC terminal of the AC adapter to the DC
terminal of the DC coupler.
7
Connect the AC plug cord to the AC adapter.
8
Plug the AC plug cord into the power outlet.
• Make sure that the camera is turned off before connecting or
disconnecting the AC adapter.
• Make sure that the AC plug cord and the DC terminal connecting the
AC adapter to the camera are inserted securely. Data may be lost if
either becomes disconnected while data is being recorded on the SD
Memory Card or the built-in memory.
• Use the AC adapter with due care to avoid fire or electric shock.
Be sure to read “About the Battery Charger and the AC Adapter” (p.2)
before using the AC adapter.
• Be sure to read the operation manual accompanying the AC adapter
kit K-AC108 before using the adapter.
• When connecting the AC adapter, you cannot set the camera upright
on the table because the cord from the DC coupler comes out of the
bottom of the camera. Additionally, do not place the camera with the
lens facing down because the lens extends when the camera turns on.
Hold the camera in your hand or use a tripod when using the AC
adapter.
To Next Page
Loading...
Need help?
General
