81
3
Taking Pictures
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
Use the four-way controller (2345) to select Q or \.
3
Press the 4 button.
The shooting mode is selected and the
camera returns to capture status.
When the camera detects a face, the Face
Detection function is activated and the face
detection frame appears (p.67).
4
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
When the \ mode is selected, the focus frame follows the subject
while the shutter release button is pressed halfway.
5
Press the shutter release button fully.
The picture is taken.
Four-way controller
4 button
Shutter release button
38
38
14:25
14:25
10/10/2010
To Next Page
Loading...
Need help?
General
