99
3
Taking Pictures
You can select the sensitivity to suit the brightness of the surroundings.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Sensitivity].
3
Press the four-way controller (5).
A pull-down menu appears.
• When the shutter release button is pressed halfway, the brightness is
metered and the exposure is determined.
• When the subject is outside the focusing area and you want to use
N (Spot AE metering), aim the camera at the subject and press the
shutter release button halfway to lock the exposure, then compose
your picture again and press the shutter release button fully.
• Depending on the selected shooting mode, the AE metering setting
may not be changed. Refer to “Functions Available for Each Shooting
Mode” (p.196) for details.
• If you change the [AE Metering] setting frequently, you can save time
by assigning it to the Green button (p.107).
Saving the AE Metering setting 1p.113
Setting the Sensitivity
Auto The sensitivity is automatically adjusted by the camera. (Sensitivity 64 - 800)
64
The lower the sensitivity, the less noise that affects the image. The
shutter speed will be slower in low light conditions.100
200
400
800
1600
Higher sensitivity settings use faster shutter speeds in low light
conditions to reduce camera shake, but the image may be affected by
noise.
3200
6400
To Next Page
Loading...
Need help?
General
Weight and Dimensions
