72
3
Taking Pictures
6
Press the shutter release button fully.
The picture is taken.
In 9 (Green) mode, you can enjoy easy picture-taking using standard
settings, regardless of the settings in the [A Rec. Mode] menu.
The 9 mode settings are as shown below.
1
Press the Green button in A
mode.
The camera switches to 9 mode.
Press the Green button again to return to
the status before 9 mode was selected.
When the camera detects a person’s face,
the Face Detection function is activated and
the face detection frame appears (p.69).
2
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
3
Press the shutter release button fully.
The picture is taken.
Taking Pictures in the Basic Mode (Green Mode)
Flash Mode , (Auto)
Highlight Correction
P (Off)
Drive Mode 9 (Standard)
Shadow Correction
P (Off)
Focus Mode = (Standard) Shake Reduction O (On)
Information Display Normal Face Detection On
Recorded Pixels g (4288×3216) Blink Detection O (On)
White Balance F (Auto) Digital Zoom O (On)
Focusing Area J (Multiple) Instant Review O (On)
AE Metering
L (Multi-segment
metering)
Sharpness G (Normal)
Saturation G (Normal)
Sensitivity Auto Contrast G (Normal)
EV Compensation ±0.0 Date Imprint Off
38
38
To Next Page
Loading...
