Pentax Optio S1 - Powering the Camera; Installing the Battery

31
1
Getting Started
Powering the Camera
Use the rechargeable lithium-ion battery D-LI78 that is provided with the
camera.
1 Make sure that the camera is turned off and open the
battery/card cover.
Slide the battery/card cover in the direction indicated by the arrow 1
and flip the cover open 2.
2 Push the battery lock lever in the direction of the arrow
3 and insert the battery so that the PENTAX logo is
facing toward the screen display.
Match the marks on the battery to the marks inside the battery
compartment and push the battery in until it is locked in place.
Installing the Battery
Make sure that the battery is inserted with the PENTAX logo facing
toward the screen display. If the battery is incorrectly oriented,
malfunction may result.
Battery/
card cover
Battery lock lever
Battery