Pentax Optio S1 - Compensating for Exposure (EV Compensation)

94
3
Taking Pictures
You can adjust the overall brightness of the picture.
Use this function to take pictures that are intentionally overexposed or
underexposed.
1 Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2 Use the four-way controller (23) to select [EV
Compensation].
3 Use the four-way controller (45)
to select the EV value.
To brighten, select a positive (+) value. To
darken, select a negative (–) value.
You can choose the EV setting in the range
of –2.0 EV to +2.0 EV in 1/3 EV steps.
4 Press the 3 button.
The camera returns to capture status.
Compensating for Exposure (EV Compensation)
• When the histogram is displayed in still picture capture mode/playback
mode, you can check the exposure (p.26).
• The EV compensation function cannot be used in 9 (Green) or b
(Auto Picture) mode.
• If you change the [EV Compensation] setting frequently, you can save
time by assigning it to the Green button (p.107).
Saving the EV Compensation value setting 1p.113
Rec. Mode
1/3
MENU
ၭ
ၭ
Exit
EV Compensation
Recorded Pixels
White Balance
AE Metering
Sensitivity
Focusing Area
AWB
Auto
0.0